Filter
Top Products
MSDP peer information (Continued)TABLE 15
This field... Displays...
TCP connection state The state of the connection with the neighbor. Can be one of the following:
• LISTEN - Waiting for a connection request.
• SYN-SENT - Waiting for a matching connection request after having sent a
connection request.
• SYN-RECEIVED - Waiting for a confirming connection request acknowledgment
after having both received and sent a connection request.
• ESTABLISHED - Data can be sent and received over the connection. This is the
normal operational state of the connection.
• FIN-WAIT-1 - Waiting for a connection termination request from the remote TCP, or
an acknowledgment of the connection termination request previously sent.
• FIN-WAIT-2 - Waiting for a connection termination request from the remote TCP.
• CLOSE-WAIT - Waiting for a connection termination request from the local user.
• CLOSING - Waiting for a connection termination request acknowledgment from the
remote TCP.
• LAST-ACK - Waiting for an acknowledgment of the connection termination request
previously sent to the remote TCP (includes an acknowledgment of the connection
termination request).
• TIME-WAIT - Waiting for enough time to pass to be sure the remote TCP received
the acknowledgment of the connection termination request.
• CLOSED - There is no connection state.
Local host The IP address of the MSDP device interface with the peer.
Local port The TCP port the MSDP router is using for the BGP4 TCP session with the neighbor.
Remote host The IP address of the neighbor.
Remote port The TCP port number of the peer end of the connection.
ISentSeq The initial send sequence number for the session.
SendNext The next sequence number to be sent.
TotUnAck The number of sequence numbers sent by the MSDP device that have not been
acknowledged by the neighbor.
SendWnd The size of the send window.
TotSent The number of sequence numbers sent to the neighbor.
ReTrans The number of sequence numbers the MSDP device retransmitted because they were
not acknowledged.
IRcvSeq The initial receive sequence number for the session.
RcvNext The next sequence number expected from the neighbor.
RcvWnd The size of the receive window.
IPv4 Multicast Protocols
FastIron Ethernet Switch IP Multicast Configuration Guide 131
53-1003085-02