35
MacintoshWireless Network
Windows
®
Macintosh
Wireless Network
d Click Install Printer Driver on the menu
screen.
e Click Wireless Network users.
f Choose Wireless Setup and Driver Install
(Recommended), and then click Next.
g Choose Step by Step install
(Recommended) and then click Next.
h Choose With cable (Recommended) and
then click Next.
i Connect the Brother printer to you access point
using a network cable and click Next.
j Choose the printer you wish to configure, and
click Next. If the list is blank, check if the
access point and the printer are powered on,
and then click Refresh.
Note
• The default Node name is “BRNxxxxxxxxxxxx”.
• You can find your printer’s MAC Address
(Ethernet Address) and the IP Address by
printing out the Printer Settings Page. See Print
the Printer Settings Page on page 44.
