Filter
Top Products
iii
Use the printer within the recommended power range.
The power cord, including extensions, should be no longer than 5 meters (16.5 feet).
Do not share the same power circuit with other high-powered appliances, such as an air conditioner, copier,
shredder and so on. If you cannot avoid using the printer with these appliances, we recommend that you
use a voltage transformer or a high-frequency noise filter.
Use a voltage regulator if the power source is not stable.
Avoid using this product during an electrical storm. There may be a remote risk of electric shock from
lightning.
DO NOT use this product to report a gas leak in the vicinity of the leak.
Use only the power cord provided with the machine.
Plastic bags are used in the packaging. To avoid danger of suffocation, keep these bags away from babies
and children.
DO NOT use flammable substances, any type of spray or any organic solvent/liquids contains alcohol or
ammonia to clean the inside or outside of the machine. Doing this may cause a fire or electrical shock. Refer
to Cleaning on page 128 for how to clean the machine.
DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner dust to ignite
inside the vacuum cleaner, potentially starting a fire. Carefully clean the toner dust with a dry, lint-free cloth
and dispose of it according to local regulations.
Cleaning the outside of the printer:
• Make sure that you have unplugged the printer from the AC power outlet.
• Use neutral detergents. Cleaning with volatile liquids such as thinner or benzine will damage the outside
surface of the printer.
• DO NOT use cleaning materials that contain ammonia.
Power source: USA and Canada: AC 110 to 120 V, 50/60 Hz
Europe and Australia: AC 220 to 240 V, 50/60 Hz