Filter
Top Products
Control Panel
78
3
Back light (HL-3070CW only) 3
LCD messages 3
The message on the LCD shows the current printer status during normal operation.
Ready
The mark indicates the wireless signal strength with four levels. ( means no signal, means weak,
means middle, and means strong.) (HL-3070CW only)
When an error has occurred, the type of error is displayed on the LCD message at first as shown below.
Cover is open
Next, the second message which shows information for clearing the error is displayed on the LCD message
as shown below.
Close the Top Co
Printer status messages 3
The following table shows the printer status messages during normal operation:
Light Meaning
Off The printer is off or in sleep status.
Green (General, Error, Setting) Ready to print
Printing
Warming up
There is a problem with the printer.
Choosing a menu (Control panel menu, Reprint menu or Direct Print menu)
Pause
Printer Status Message Meaning
Cooling Down The printer is cooling down.
Cancel Printing Canceling the job.
Ignore Data Printer is ignoring data processed using the PS driver.
Pause The printer has suspended its operations. Press Go to start the printer again.
Please Wait The printer is warming up.
The printer is carrying out the calibration process.
Printing Printing.
Ready Ready to print.
Sleep In Sleep mode.