Brother 3070CW Printer User Manual


 
Driver and Software
60
2
Print Quality
You can choose the following print quality settings.
•Normal
600 dpi class. Recommended for ordinary printing. Good print quality with good print speeds.
•Fine
2400 dpi class. The finest print mode. Use this mode to print precise images such as photographs.
Since the print data is much larger than in normal mode, processing time, data transfer time and printing
time will be longer.
Note
The print speed will change depending on what print quality setting you choose. Higher print quality takes
longer to print, while lower print quality takes less time to print.
(HL-3040CN only) If you choose Fine, the LCD may show Out of Memory because the printer’s memory
is full. If you still get the same error message after you try printing several times, add more memory. (See
Installing extra memory on page 100.)
Color/Mono
You can change the Color/Mono settings as follows:
•Color
When your document contains color and you want to print it in color, select this mode.
•Mono
Select this mode if your document has only black and grayscale text and/or objects. Mono mode makes
the print processing speed faster than color mode. If your document contains color, selecting Mono
mode prints your document in 256 levels of gray.
•Auto
The printer checks the content of your documents for color. If color is detected, it prints in color. If no
color content is detected, it prints in monochrome. The total printing speed may become slower.
Note
If the Cyan, Magenta or Yellow toner reaches the end of its life, choosing Mono will allow you to keep
printing as long as the Black toner does not reach the end of its life.
Toner Save Mode
You can conserve toner use with this feature. When you set Toner Save Mode to On, print appears lighter.
The default setting is Off.
Note
We do not recommend Toner Save for printing Photo or Gray Scale images.
Reverse Printing (Mac OS X 10.3.9 and 10.4.x only)
Check Reverse Print to rotate the data by 180 degrees.