Filter
Top Products
Option
101
4
d Hold the SO-DIMM by the edges and align the notches in the SO-DIMM with the protrusions in the slot.
Insert the SO-DIMM diagonally (1), then tilt it toward the interface board until it clicks into place (2).
e Put the metal (2) and then the plastic (1) SO-DIMM covers back on.
f Reconnect the interface cable to your printer. Plug the printer back in, and then turn on the power switch.
Note
To make sure that you have installed the SO-DIMM properly, you can print the printer settings page that
shows the current memory size. (See Machine Info. on page 83.)
1
2
2
1