Brother DCP-110C All in One Printer User Manual


 
1 - 6 INTRODUCTION
About paper
The print quality can be affected by the type of paper you use in the
DCP.
To get the best print quality for the settings you’ve chosen, always
set the Paper Type to match the type of paper you load.
You can use plain paper, inkjet paper (coated paper), glossy paper,
transparencies and envelopes.
We recommend testing various paper types before purchasing large
quantities.
For best results, use the recommended paper.
Recommended Paper
To get the best print quality, we suggest using Brother paper.
(See table below.)
We recommend using “3M Transparency Film” when you print on
transparencies.
Brother Paper
When you print on inkjet paper (coated paper),
transparencies and glossy paper, be sure to select the
proper media in the “Basic” tab of the printer driver or in the
Paper Type setting of the menu.
When you print on Brother glossy paper, load the instruction
sheet included with the glossy paper in the paper tray first,
and then place the glossy paper on the instruction sheet.
When you use transparencies or glossy paper, remove each
sheet immediately to prevent smudging or paper jams.
Avoid touching the printed surface of the paper immediately
after printing, the surface may not be completely dry and
may stain your fingers.
Paper Type Item
Letter Plain BP60 PL
Letter Glossy BP60 GLL
Letter Inkjet (Photo Matte) BP60 ML