Brother DCP-110C All in One Printer User Manual


 
TROUBLESHOOTING AND ROUTINE MAINTENANCE 5 - 8
Software Difficulties
Cannot install software or print Run the Repair MFL-Pro Suite program on the CD-ROM. This program
will repair and reinstall the software.
‘Device Busy’ Make sure the DCP is not showing an error message on the LCD.
PhotoCapture Center
Difficulties
Removable Disk does not
work properly.
a)Have you installed the Windows
®
2000 update?
If not, do the following:
1. Disconnect the USB cable.
2. Install the Windows
®
2000 update. Please see the Quick Setup
Guide. After the installation the PC will be automatically restarted.
3. Wait about 1 minute after you reboot the PC, and then connect the
USB cable.
b)Take out the media card and put it back in again.
c) If you have tried "Eject" from within Windows
®
, you must take out the
media card before you continue.
d)If an error message appears when you try to eject the media card, it
means the card is being accessed.
Wait a while and then try again.
e)If all of the above do not work, please turn off your PC and DCP, and
then turn them on again.
(You will have to unplug the power cord of the DCP to turn it off.)
Cannot access Removable
Disk from Desktop icon.
Make sure you have inserted the media card into the media slot.
Other Difficulties
Incorrect LCD language See How to change LCD language on page 5-9.
DIFFICULTY SUGGESTIONS