Filter
Top Products
Appendix A
A - 5
Using a cordless external
handset
If your cordless telephone is connected to the
EXT. jack on the machine and you typically
carry the cordless handset elsewhere, it is
easier to answer calls during the Ring Delay.
Changing the remote codes
The preset Fax Receive Code is 51. The
preset Telephone Answer Code is #51. If you
want to, you can replace them with your own
codes.
1
If it is not illuminated in green, press
(Fax).
2
Press Menu/Set, 2, 1, 4.
3
Press ▲ or ▼ to select On (or Off).
Press Menu/Set.
4
Enter the new Fax Receive Code.
Press Menu/Set.
5
Enter the new Telephone Answer Code.
Press Menu/Set.
6
Press Stop/Exit.
Note
■ If you are always disconnected when
accessing your external TAD remotely, try
changing the Fax Receive Code and
Telephone Answer Code to another
three-digit code (such as ### and 999)
■ Remote Codes might not work with some
telephone systems.
Connecting an external
device to your machine
Connecting an external
telephone
You can connect a separate telephone (or
telephone answering device) directly to your
machine as shown in the diagram below.
Connect the telephone line cord to the jack
labeled EXT. in the left of the machine.
When you are using an external phone, the
LCD shows
Ext. Tel in Use.
Connecting an external
telephone answering device
(TAD)
Sequence
You may choose to connect an external
answering device. However, when you have
an external TAD on the same telephone line
as the machine, the TAD answers all calls
and the machine “listens” for fax calling
(CNG) tones. If it hears them, the machine
takes over the call and receives the fax. If it
does not hear CNG tones, the machine lets
the TAD continue playing your outgoing
message so your caller can leave you a voice
message.
4.Remote Code
Extension
Telephone
External
Telephone