Brother HL-1040 Printer User Manual


 
-11 -
Action 6: Plug in and Turn on Your Printer
1
Plug the power cord into the AC power
outlet and the printer power inlet.
NOTE
The shape of the power cord varies
according to the country of destination.
2
Turn on the
power
switch that is located
on the left side of your printer.
3
Drum
Alarm
Ready
Paper
Data
Toner
Make sure that the
READY
lamp is lit after
the printer has warmed up (approximately
30 seconds).
4
Make sure that the printer automatically
ejects the starter sheet while the printer is
warming-up immediately after installing a
new drum unit.
Starter Sheet