Filter
Top Products
UNINET IMAGING INC. • BROTHER HL 2030/TN 350 CARTRIDGE REMANUFACTURING INSTRUCTIONS
15. Install the small outside end plate and screw on the non-gear side.
Make sure the clear plastic plug for the optical sensor is locked in the proper position.
16. Install the developer roller gear, c-ring, and black axle. Make sure all the other gears are meshing properly.
You may have to release the white spacer on the mag shaft to get the gear back on.
© 2007 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not guarantee or warrant downloaded information.
www.uninetimaging.com/technical.asp
11124 Washington Blvd., Culver City, California USA 90232 • Ph +1 310 280 9620 • Fx +1 310 280 0533 • techsupport2@uninetimaging.com