Filter
Top Products
Sending a fax
37
5
Overseas mode 5
If you are having difficulty sending a fax
overseas due to a bad connection, then
turning on the overseas mode may help.
This is a temporary setting, and will only be
active for your next fax.
a Make sure you are in Fax mode .
b Load your document.
c Press Menu, 2, 2, 9.
22.Setup Send
9.Overseas Mode
a On
b Off
Select
ab & OK
d Press a or b to select On or Off.
Press OK.
Delayed faxing 5
You can store up to 50 faxes in the memory
to be sent within a twenty four hour period.
a Make sure you are in Fax mode .
b Load your document.
c Press Menu, 2, 2, 3.
22.Setup Send
3.Delayed Fax
Set Time=00:00
Enter & OK Key
d Enter the time you want the fax to be
sent (in 24-hour format). Press OK.
(For example, enter 19:45 for 7:45 PM)
22.Setup Send
3.Delayed Fax
Set Time=19:45
Enter & OK Key
The number of pages you can scan into the
memory depends on the amount of data
printed on each page.
Delayed batch transmission 5
Before sending the delayed faxes, your
machine will help you economize by sorting
all the faxes in the memory by destination and
scheduled time.
All delayed faxes that are scheduled to be
sent at the same time to the same fax number
will be sent as one fax to save transmission
time.
a Make sure you are in Fax mode .
b Press Menu, 2, 2, 4.
22.Setup Send
4.Batch TX
a On
b Off
Select ab & OK
c Press a or b to choose On (or Off).
Press OK.
d Press Stop/Exit.