Filter
Top Products
Receiving a fax
41
6
Receive Mode settings 6
Ring Delay 6
The ring delay sets the number of times the
machine rings before it answers in Fax Only
and Fax/Tel modes.
If you have external or extension phones on
the same line as the machine or subscribe to
the BT Call Sign
1
service, keep the Ring
Delay setting of 4. (See Operation from
extension telephones on page 49 and Fax
Detect on page 42.)
1
BT Call Sign is for U.K. only.
a Make sure you are in Fax mode .
b Press Menu, 2, 1, 1.
21.Setup Receive
1.Ring Delay
a 03
b 04
Select
ab & OK
c Press a or b to select how many times
the line rings before the machine
answers. Press OK.
d Press Stop/Exit.
F/T Ring Time 6
When somebody calls your machine, you and
your caller will hear the normal telephone ring
sound. The number of rings is set by the ring
delay setting.
If the call is a fax, then your machine will
receive it; however, if it is a voice call the
machine will sound the F/T ring (a fast
double-ring) for the time you have set in the
F/T ring time setting. If you hear the F/T ring
it means that you have a voice caller on the
line.
Because the F/T ring is made by the machine,
extension and external telephones will not
ring; however, you can still answer the call on
any telephone. For more information see
Using remote codes on page 50.
a Make sure you are in Fax mode .
b Press Menu, 2, 1, 2.
21.Setup Receive
2.F/T Ring Time
a 20 Secs
b 30 Secs
Select ab & OK
c Press a or b to select how long the
machine will ring to alert you that you
have a voice call (20, 30, 40 or 70
seconds). Press OK.
d Press Stop/Exit.