Filter
Top Products
7
Getting Started
Extra Strength Adhesive Tape
☞
For textured, rough, or slippery surface, we recommend using Extra Strength Adhesive
Tape.
☞
Although the instruction sheet included with the Extra Strength Adhesive
Tape cassette recommends cutting the tape with scissors, the tape cutter
that this P-touch is equipped with is able to cut Extra Strength Adhesive
Tape.
Flexible ID Tape
☞
For applications that require more flexible labels, such as around sharp bends and
cylindrical objects, we recommend using Flexible ID Tape.
☞
Labels made with Flexible ID Tape are not designed for use as electrical insulation.
☞
When wrapping labels around cylindrical objects, the diameter of the object should be at
least 1/8
"
(3 mm), otherwise the label should be wrapped as a flag and the FLAG Label
Type mode should be used. In addition, the overlapping ends of the label or the label flag
should be at least 3/16
"
(5 mm).
☞
The label may peel off cylindrical objects if the object is bent after the label is affixed.
Diameter > 3 mm
Diameter > 3 mm
Overlap > 5 mm
Overlap > 5 mm
Flag > 5 mm