Filter
Top Products
55
Using P-touch With a
Computer (for PT-1650 only)
Using database data in a Label Type mode
This function enables you to select the range of database fields to print.
1
Press a, and then select the Label Type mode as described in chapter 2.
2
Press g, then a. The message “CLEAR TEXT & PRINT DATABASE?”
appears.
3
Press n.
4
Press l or r until RECORD NO. is displayed, and then specify the desired
range of records.
5
Press l or r until FIELD NO. is displayed, and then specify the desired
range of record fields.
6
Press n (or p). START appears in the Print Option menu.
7
Press n (or p) to begin printing the labels using the specified range of
records.
☞
If label text has been typed in, you will be asked to choose either TEXT PRINT or
DATA PRINT when g, then a is pressed. At this time, select DATA
PRINT. If TEXT PRINT is selected, the special printing functions for printing
multiple copies of labels (refer to page 32), printing multiple copies with incremental
characters (refer to page 32), printing a range of text blocks (refer to page 34), or
printing the label text as a mirror image (refer to page 34) are available.
☞
To specify settings for additional Print Option functions, instead of continuing with
step
7
, press u or d until CONTINUE is displayed in the Print Option
menu, and then press n. (Refer to Printing multiple copies of a label on
page 32 and Printing mirrored labels on page 34.)
☞
While trying to print a large amount of data at one time, some outputted labels may be
blank. For example, when printing 50 records, the maximum number of characters
that can be printed at one time is limited to approximately 200.