Filter
Top Products
13
Label Type Modes
●
BL. LEN. (block length): * For the PORT Label Type mode:
20 to 200 mm
Default: 30 mm
* For the PANEL Label Type mode:
6 to 200 mm
Default: 30 mm
●
FRAME: * For the PORT Label Type mode:
OFF, 1 , 2 , 3 , 4
Default: OFF
* For the PANEL Label Type mode:
OFF, 1 , 2 , 3 ,
4 , 5 , 6 ,
7 , 8 , 9
Default: OFF
●
PRINT (print order): IN ORDER, REVERSE
Default: IN ORDER
☞ For these types of labels, we recommend using Strong Adhesive Tape.
☞ The PRINT parameter is only available with the PANEL Label Type mode.
☞
Using the Numbering function with the PANEL Label Type mode makes it easy to
create a single label of multiple blocks containing ascending characters, which can be
used, for example, to label patch panels as shown above. Simply type in one block of
text, and then use the Numbering function to print several copies of the text block on
a single label while automatically increasing certain characters in each block. (For
details on the Numbering function, refer to
Printing multiple copies with
incremental characters
on page 31.)