Brother 2460 Printer User Manual


 
23
Basic Functions
Formatting the Label
Specifying a label length
The length of the label can be specified as follows.
1
Press g, then A.
2
Press l or r until LENGTH is displayed.
3
Press u or d until the desired label length is
displayed (or use the number keys to type in the
desired setting).
4
Press n.
Specifying a margin size
The size of the margins for the left and right sides of the text can be specified.
1
Press g, then A.
2
Press l or r until MARGIN is displayed.
3
Press u or d until the desired margin
setting is displayed (or use the number keys to
margine type in the desired setting).
4
Press n.
Once the PERSONAL symbol category becomes full, newly selected symbols will
overwrite older ones unless the Symbol Save function is set to OFF
. (Refer to
Specifying if the PERSONAL symbol category is continually updated on page 39.)
6 to 999 mm
2 to 99 mm 2 to 99 mm