Filter
Top Products
Troubleshooting and routine maintenance
119
C
Packing and shipping
the machine
C
If for any reason you must move or ship your
machine, carefully re-pack in the original
packing material to avoid any damage during
transport. If you do not pack the machine
properly, you could void your warranty. The
machine should be adequately insured with
the carrier.
If the machine must be shipped, please read the
instructions in this section which explains how
to properly prepare your machine for transport.
WARNING
Once your machine has been set up and
used, we DO NOT recommend that it be
moved or shipped unless absolutely
necessary.
Colour laser printers are complex printing
devices. Moving the machine or shipping it
without properly removing the installed
supplies can result in SEVERE damage to
the machine. As a result, your machine may
not operate properly afterwards.
Failure to properly prepare the machine for
shipping according to the instructions in this
section may
VOID YOUR WARRANTY.
To prevent injuries when moving or lifting
this machine, make sure at least two people
lift the machine together. Be careful not to
pinch your fingers when you put the
machine down.
Make sure that you have the following parts
for repacking:
1 Insertion sheet for repacking
2 Plastic bag for the waste toner box
3 Orange protective cover, Plastic bag that
the toner cartridge originally came in
(4 pieces of each)
4 Orange packing material for locking the
drum unit and the belt unit (4 pieces)
5 A piece of paper (Letter or A4) to protected
the belt unit (supplied by the user)
6 Joints for attaching cartons (4 pieces)