Filter
Top Products
17
4
4
Wi-Fi Direct network terms 4
Group Owner (G/O) 4
If you set Group Owner to On, your Brother machine serves as an access point when you configure a Wi-Fi
Direct network. The G/O assigns an SSID name, password and IP address for the Wi-Fi Direct network. The
default setting is Off.
Device Information 4
Device Name 4
You can check the device name of the Brother machine in the Wi-Fi Direct network environment. The device
name will be shown as MFC-xxxx or DCP-xxxx (where xxxx is your model name.).
SSID 4
This field displays the current Wi-Fi Direct network SSID name. The display shows up to 32 characters of the
SSID name.
IP Address 4
This field displays the current IP address of the machine, as assigned by the G/O.
Status Information 4
Status 4
This field displays the current Wi-Fi Direct network status. When your machine is a G/O, it displays the
message G/O Active(**) (where ** is the number of devices). When your machine is a client, the machine
displays the message Client Active. If you see Off, your machine’s Wi-Fi Direct interface is disabled.
Signal 4
This field displays the current Wi-Fi Direct network signal strength.
Channel 4
This field displays the current Wi-Fi Direct network channel.
Speed 4
This field displays the current Wi-Fi Direct network speed.
I/F Enable 4
If you want to use the Wi-Fi Direct network connection, set I/F Enable to On.
Glossary 4