Filter
Top Products
INITIAL SETUP
4 - 1
4
4
Initial Setup
Getting Started
Setting Dialing Mode (Tone/Pulse)
Your fax machine comes set to accommodate tone (multi-frequency) dialing service.
If you have pulse (rotary) dialing service, you need to change the dialing mode.
1
Press Function/Set, 1, 4.
2
Use or to select TONE or PULSE and
press Function/Set.
3
Press Stop to exit.
Setting Date and Time
Your fax machine displays the date and time, and prints it on every fax you send.
In the event of a power failure, you may have to reset the date and time. All other
settings remain unaffected.
1
Press Function/Set, 1, 1.
2
Enter the last two digits of the year and press
Function/Set.
3
Enter two digits for the month and press
Function/Set. (For example, enter 09 for
September, or 10 for October)
4
Enter two digits for the day and press
Function/Set. (For example, 06)
5
Enter the time in 24-hour format and press Function/Set. (For example, enter 15:25
for 3:25 PM)
6
Press Stop. The screen now displays the date and time you set, and displays it
whenever the fax machine is in Standby mode.
There are two different types of this display. One shows MONTH/DAY/YEAR, the
other shows DAY/MONTH/YEAR.
DIALING:TONE?
DIALING:PULSE?
ENTER YEAR:XX
ENTER MONTH:XX
ENTER DAY:XX
ENTER TIME:XX:XX