Filter
Top Products
V - 44
WSW31 (Function setting 9)
Selector
No.
Function Setting and Specifications
1 Not used.
2
Default reduction rate for failure of
automatic reduction during
recording
0: 100% 1: 50%
3
4
Not used.
5
Minimum short-OFF duration in
distinctive ringing
0: 130 ms 1: 90 ms
6
|
8
Not used.
NOTE: Selector 5 is applicable in those areas where the distinctive ringing is supported.
l Selector 2: Default reduction rate for failure of automatic reduction during recording
This selector sets the default reduction rate to be applied if the automatic reduction function fails to
record one-page data sent from the calling station in a single page of the current recording paper.
If it is set to “0,” the equipment records one-page data at full size (100%) without reduction; if it is
set to “1,” the equipment records it at half size (50%).
l Selector 5 Minimum short-OFF duration in distinctive ringing
The ringer pattern consists of short and long rings, e.g., short-short-long rings. This selector sets
the minimum OFF duration following a short ring in order to avoid missing ringer tones in distinctive
ringing.
If this selector is set to “1,” when the short-OFF duration is a minimum of 90 ms long, then the
equipment will interpret the short-OFF as OFF.