Filter
Top Products
GT-3 Series
1. Read This First
5
1-2. Unpacking Your Printer
<Note>
Your printer must be unpacked by a Brother representative or a Brother authorized shipping company.
After unpacking, check that the following parts are included.
Contact Brother Customer Service Hot Line if any of these is missing.
z GT-3 Printer
z Install CD
z AC cord
z Nozzle Cleaning Kit: 2 for GT-381 and GT-361, 1 for GT-341
z Print Heads: 8 for GT-381, 6 for GT-361, 4 for GT-341
z One Waste Ink Tank
z One Encoder Cleaner
z One Maintenance Cartridge for GT-381, GT-361
z One Tube Cleaning Bottle for GT-381, GT-361
z Flushing Plate (including Flushing Plate Felt and Flushing Plate Sponge)
z Print Head Protection Film: 8 for GT-381, 6 for GT-361, 4 for GT-341
z Basic Operation Manual
z "How to uncrate" Manual
<Note>
Filter Cartridges (8 for GT-381, 6 for GT-361, 4 for GT-341)are installed in both Ink Cartridge Slots. Keep them since they
should be used for maintenance & transport operations.
1-3. Required Condition
Please use your printer under the conditions described in this section.
1-3-1. Environment
Temperature Humidity
Keeping your printer
32 °F to 104 °F
(0 °C to 40 °C)
20 % to 85 %
(no condensation)
Operating your printer
50 °F to 95 °F
(10 °C to 35 °C)
For the best print result
64 °F to 86 °F
(18 °C to 30 °C)
35 % to 85 %
(no condensation)
If your room is dry, we recommend using a humidifier to avoid Print Heads from clogging with dried ink.