Filter
Top Products
Wireless configuration for Windows
®
using the Brother installer application (For HL-2170W)
39
4
Note
To confirm the wireless setting is enabled, check the text to the right side of IEEE 802.11b/g in the
Node Type section on the Network Configuration page. Active means that the wireless setting is enabled
and Inactive means that the wireless setting is disabled. If the wireless setting is disabled, press the Go
for 10 seconds again.
i You need to temporarily change your computer’s wireless settings. Follow the on-screen instructions.
Make sure you take notes on all the settings such as SSID or channel of your computer. You will need
them to return your computer back to its original wireless settings, and then click Next.
Item Record the current wireless computer settings
Communication mode: (Infrastructure / Ad-hoc)
Channel: (1-14)
Network name: (SSID / ESSID)
Authentication method: (Open system / Shared key /
WPA/WPA2-PSK / LEAP)
Encryption mode: (None / WEP / TKIP / AES/ CKIP)
Encryption key: