Filter
Top Products
Control Panel
57
3
FRONT COVER OPEN
Close the front cover of the machine.
FUSER COVER OPEN
Close the fuser cover located behind the back cover of the machine.
JAM TRAY 1 / JAM INSIDE / JAM REAR / JAM DUPLEX
Clear the paper jam. See Paper jams and how to clear them on page 104. If the
machine does not start printing, press Go.
MEMORY FULL
The machine memory is full and the machine cannot print full pages of a document.
See Solving print problems on page 118.
PRINT OVERRUN
A print overrun occurred and the machine cannot print full pages of a document. See
Solving print problems on page 118.
SIZE ERROR DX (HL-2240D / HL-2242D / HL-2250DN / HL-2270DW only)
Set the correct paper that you want to use, or load the same size paper that you
selected in the current driver setting. Press Go. The paper size you can use for
automatic duplex printing is A4, Letter, Legal or Folio.
DUPLEX DISABLED (HL-2240D / HL-2242D / HL-2250DN / HL-2270DW only)
Put the duplex tray in the machine and close the back cover.
DRUM ERROR
The corona wire needs to be cleaned. See Cleaning the corona wire on page 84.
DRUM STOP
Replace the drum unit with a new one. See Replacing the drum unit on page 78.
LEDs Machine Status