Filter
Top Products
Appendix (for Europe and Other Countries)
190
B
Important information: regulations B
Radio interference (220 to 240 volt model only) B
This printer follows EN55022 (CISPR Publication 22)/Class B.
Before you use this product, make sure that you use one of the following interface cables.
1 A shielded parallel interface cable with twisted-pair conductors and that it is marked IEEE 1284 compliant
(HL-4050CDN / HL-4070CDW only).
2 A USB cable.
The cable must not be more than 2 meters long.
International ENERGY STAR
®
Compliance Statement (For HL-4050CDN /
HL-4070CDW only) B
The purpose of the International ENERGY STAR
®
Program is to promote the development and
popularization of energy-efficient office equipment. As an ENERGY STAR
®
Partner, Brother Industries, Ltd.
has determined that this product meets the ENERGY STAR
®
guidelines for energy efficiency.
IEC 60825-1 specification (220 to 240 volt model only) B
This printer is a Class 1 laser product as defined in IEC 60825-1 +A2:2001 specifications. The label shown
below is attached in countries where it is needed.
This printer has a Class 3B laser diode which produces invisible laser radiation in the laser unit. You should
not open the laser unit under any circumstances.
Caution
B
Use of controls or adjustments or performance of procedures other than those specified in this User’s Guide
may result in hazardous invisible radiation exposure.
CLASS 1 LASER PRODUCT
APPAREIL À LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT