Filter
Top Products
Driver and Software
59
3
Color/Mono
You can change the Color/Mono settings as follows:
•Color
When your document contains color and you want to print it in color, select this mode.
•Mono
Select this mode if your document has only black and grayscale text and/or objects. Mono mode makes
the print processing speed faster than color mode. If your document contains color, selecting Mono
mode prints your document in 256 levels of gray.
•Auto
The printer checks the content of your documents for color. If color is detected, it prints in color. If no
color content is detected, it prints in monochrome. The total printing speed may become slower.
Note
If the Cyan, Magenta or Yellow toner runs out, choosing Mono will allow you to keep printing as long as
the Black toner does not run out.
Mirror Print
Check Mirror Print to reverse the data from left to right.
Reverse Print
Check Reverse Print to reverse the data from up to down.
Toner Save Mode
You can conserve toner using this feature. When you set Toner Save Mode to On, print appears lighter.
The default setting is Off.
Note
We do not recommend Toner Save for printing Photo or Gray Scale images.
Sleep Time
When the printer does not receive data for a certain period of time, it enters sleep mode. In sleep mode,
the printer acts as though it were turned off. The default setting for timeout is 5 minutes. If you want to
change the sleep time, choose Manual and then enter the time in the text box on the driver.
While the printer is in sleep mode, the LCD light is off, but the printer can still receive data. Receiving a
print file or document or pressing one of the buttons will automatically wake up the printer to start printing