Filter
Top Products
92
Options
4
e Hold the SO-DIMM by the edges and align the notches in the SO-DIMM with the protrusions in the slot.
Insert the SO-DIMM diagonally (1), then tilt it toward the interface board until it clicks into place (2).
f Put the metal (2) and then the plastic (1) SO-DIMM covers back on.
g Plug the machine’s power cord back into the AC power outlet first, and then connect the interface cables.
h Turn on the machine’s power switch.
Note
To make sure that you have installed the SO-DIMM properly, you can print the printer settings page that
shows the current memory size. (See Print a Printer Settings page uu page 83.)
12
1
2