Filter
Top Products
4-14
☛
☛☛
☛ 3.
Unscrew the two screws that secure the PCB access plate. Slide the plate
toward you and remove it.
Fig. 4-10
☛
☛☛
☛ 4.
Unpack the DIMM and hold it by the edges.
!
Caution
DIMM boards can be damaged by even a small amount of static electricity.
Do not touch the memory chips or the board surface. Wear an antistatic
wrist strap when you install or remove the board. If you do not have an
antistatic wrist strap, frequently touch the bare metal on the printer.
☛
☛☛
☛ 5.
Holding the DIMM by the edges, align the notches on the DIMM with the DIMM
slot.