Filter
Top Products
Setting Up the Machine
7
4
Set Your Country
You must set your country so that the machine works
correctly on local telecommunication lines in each
country.
1 Check that the power is turned on by plugging
in the power cord and turn the power switch on.
Press OK.
Set Country
Press OK Key
2 Press or to choose the country.
3 Press OK when the LCD shows your country.
4 The LCD prompts you to make sure of the
country again.
5 If the LCD shows the correct country, press 1
to go to step 6.
Or press 2 to go back to step 2 to choose the
country again.
6 After the LCD shows Accepted, the machine
will restart automatically. After the restart, the
LCD shows Please Wait.
5 Setting the date and time
The machine displays the date and time, and if you
set up the station ID, it will add it to each fax you send.
1 Press Menu.
2 Press 0.
3 Press 2.
4 Enter the last two digits of the year on the dial
pad, and then press OK.
Date&Time
Year:2008
(e.g. Enter 0, 8 for 2008.)
5 Enter the two digits for the month on the dial
pad, and then press OK.
Date&Time
Month:03
(e.g. Enter 0, 3 for March.)
6 Enter the two digits for the day on the dial pad,
and then press OK.
Date&Time
Day:25
(e.g. Enter 2, 5.)
7 Enter the time in 24-hour format on the dial
pad, and then press OK.
Date&Time
Time:15:25
(e.g. Enter 1, 5, 2, 5 for 3:25 P.M.)
8 Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to step 1.