Filter
Top Products
2
Setting Up the Machine
1
Open the ADF cover.
2
Slide ADF Support into the groove on ADF.
3
Close the ADF cover.
Do NOT connect the interface cable.
Connecting the interface cable is
done when installing the driver.
1
Open the front cover by pressing the front
cover release button.
2
Unpack the drum unit assembly.
Remove the protective part.
1
Install the Automatic
Document Feed (ADF)
Support
ADF Cover
2
Install the Drum Unit
Assembly
Front Cover
Release Button
Front Cover
Drum Unit
Assembly
Protective part
Step 1