Filter
Top Products
FRONT PANEL SETUP MENU 10 - 15
Setup Mail TX (For MFC only)
This menu has three selections Sender Subject, Size Limit and
Notification.
Sender Subject
This field displays the subject that is attached to the Internet Fax data
being sent from the Brother MFC to a PC (default is “Internet Fax
Job”).
1
Press Menu, 6, 4, 1.
2
Select 1 to change the Sender Subject—OR—2 to exit.
3
Enter the subject information.
4
Press Set.
5
Press Stop/Exit.
Size Limit
Some E-mail servers do not allow you to send large E-mail
documents. The MFC may display Out of Memory when trying to
send E-mail documents (the System Administrator will often place a
limit on the maximum E-mail size). With this function enabled, the
MFC will display Out of Memory when trying to send E-mail
documents over 1Mbyte in size. The document will not be sent and
an error report will be printed. The document you are sending should
be separated into smaller documents that will be accepted by the
mail server. (Ex. A 42 page document of the ITU-T Test Chart#1 test
chart is approximately 1Mbyte in size).
1
Press Menu, 6, 4, 2.
2
Press or to select On or Off.
3
Press Set.
4
Press Stop/Exit.