Filter
Top Products
36
Windows
®
Wireless Network
i For Windows
®
XP SP2 or greater/XP
Professional x64 Edition/ Windows Vista
®
users, when this screen appears, choose
Change the Firewall port settings to enable
network connection and continue with the
installation. (Recommended) and click Next.
If you are not using the Windows
®
Firewall, see
the User’s Guide for your software for
information on how to add the following
network ports.
For network scanning, add UDP port 54925.
For network PC-Fax receiving, add UDP port
54926.
If you still have trouble with your network
connection, add UDP port 137.
j If the machine is configured for your network,
choose the machine from the list, and then click
Next.
Note
• If your wireless settings fail, an error message
will appear during the installation of MFL-Pro
Suite and the installation will be terminated.
Confirm your network setting by following the
on-screen instruction. If you encounter this
failure, please go to step 16 on page 29 and
setup the wireless connection again.
• If you are using WEP and the LCD displayed
‘Connected’ but your machine is not found,
make sure you entered the WEP key correctly.
The WEP key is case sensitive.
• If the IP Address of the machine is not yet
configured for use on your network, the
following screen appears.
Click OK and then Configure IP Address.
Enter an IP address for your machine that is
suitable for your network by following the on-
screen instructions.