Filter
Top Products
42
For Network Users
BRAdmin Light utility (for Mac OS X users)
BRAdmin Light is a utility for initial setup of Brother network connected devices. It also can search for Brother
products on your network, view the status and configure basic network settings, such as IP address from a
computer running Mac OS X 10.3.9 or greater.
The BRAdmin Light software will be installed automatically when you install the printer driver. If you have already
installed the printer driver, you do not have to install BRAdmin Light again. For more information on BRAdmin
Light, visit us at http://solutions.brother.com/
.
Set your IP address, Subnet Mask
and Gateway using BRAdmin Light
a Double-click Macintosh HD on your desktop.
b Choose Library, Printers, Brother and then
Utilities.
c Double-click the file BRAdmin Light.jar and
run the software. BRAdmin Light will then
search for new devices automatically.
d Double-click the unconfigured device.
e Choose STATIC for Boot Method. Enter the
IP Address, Subnet Mask and Gateway, and
then click OK.
f The address information will be saved to the
machine.
Note
• If you have a DHCP/BOOTP/RARP server in
your network, you do not have to do the
following operation. The machine will
automatically obtain its own IP address.
• Make sure that version 1.4.2 or greater of
Java™ client software is installed on your
computer.
• The default password for the machine is
‘access’. You can use BRAdmin Light to
change this password.