Filter
Top Products
54
Web Based Management
5
• Auto: If you choose Auto, the machine will initially search for a Kerberos server. If the Kerberos
server is not detected, NTLMv2 will be used for the authentication method.
• Kerberos: Choose Kerberos, to use Kerberos Authentication only.
• NTLMv2: Choose NTLMv2, to use NTLMv2 Authentication only.
For Kerberos and NTLMv2 Authentication you must also configure the SNTP protocol
(network time server).
For configuring the SNTP settings, see How to configure the SNTP protocol using Web Based
Management uu page 51.
Username
Enter the Username for the authentication up to 96 characters.
Note
If the username is part of a domain, please input the username in one of the following styles: user@domain
or domain\user.
Password
Enter the password for the authentication up to 32 characters.
Kerberos Server Address (if needed)
Enter the KDC Host Address (for example: mypc.example.com) (up to 64 characters) or the IP
address (for example: 192.168.56.189).
d In the Connection Status, you can confirm the last log status. For more information, see Understanding
Error Messages uu page 56.
e Click Submit to apply your settings.