Brother PJ-562 Printer User Manual


 
Page 28
Right Margin:
This setting can modify the right margin when the ‘Custom’ ‘Page Size’ is selected.
You may choose to avoid any changes by selecting ‘Use Paper Size’ which will
assume you wish to use the full 8” available print width. You may also choose to set
a number of columns of unprinted right margin. The actual empty width created will
depend upon the current character pitch as set by ‘Default Pitch’. For example, if the
default pitch is set to 12 characters per inch, and you set the left margin to ‘9’, there
will be a 3/4” (9 x 1/12”) left margin established. If the current ‘Default Pitch’ is set
to ‘Proportional’, 10 characters per inch pitch is used for this calculation. Values that
cause the printable page width (the space left on the page by the difference between
left and right margins) of as little as 1/5”are allowed.
Text Line Spacing:
This setting is used to modify the amount of vertical space that is used for each line
of text. If you select ‘6 Lines/Inch’, lines of text will be created every 1/6”. If
you select ‘8 Lines/Inch’, lines of text will be created every 1/8”. Since the “IBM
graphics characters” used to create boxes and lines are 0.12” tall, when printing
documents that contain these characters, you will want to select “8 Lines/Inch
(0.12”)” to assure that the tops and bottoms of the graphics characters touch.