Filter
Top Products
Page 2
Connecting to a DC Supply (Optional)
The PocketJet can be powered from its internal Ni-MH battery or from a vehicle DC
supply. To install the battery, See page 34. To connect your PocketJet to a “12-volt”
vehicle DC supply to print or maintain the battery charge, follow the steps below.
1. Connect a PA-AD-500CG / WR (either with a cigarette plug or direct wired) to the
vehicle 12VDC supply as shown in Figure 3. (These items are available as options)
2. Connect the power cord to the PocketJet.
3. Turn on the vehicle power, and then turn on the PocketJet.
Figure 3. Connecting the printer to DC power