Filter
Top Products
Appendix C
36
C
Menu Bar C
1 Apply Settings to the Printer
Applies the settings to the printer; functions the same way as the Apply button in the main window. See
Apply uu page 33.
2 Save Command Settings
Saves network settings in PJL command format. The file extension is “.bin”.
By sending these commands to printers via USB, network settings for printers can be configured in the
same way as when settings are made using the Network Setting Tool (uuUser’s Guide: Mass Storage).
The following information is not saved in the command settings file.
• Node name
• IP address, subnet mask, gateway address (when the IP address is set to STATIC).
These command settings are only intended to be used to apply printer settings. Saved commands cannot
be imported to the Network Setting Tool.
Saved command files contain authentication keys and passwords. Take necessary measures to protect
saved command files such as by saving command files in locations that other users cannot access.
Do not send the command file to a printer whose model was not specified when the command file was
exported.
6
7
8
9
1
2
3
4
5