Filter
Top Products
10
Standard Telephone and FCC Notices
These notices are in effect on models sold and used in
the United States only.
This equipment is hearing aid and volume control compatible.
When programming emergency numbers and/or making test calls to
emergency numbers:
■
Remain on the line and briefly explain to the dispatcher the reason for
the call before hanging up.
■
Perform such activities in the off-peak hours, such as early morning or
late evening.
This equipment complies with Part 68 of FCC Rules. On the rear panel of
this equipment is a label that contains, among other information, the FCC
Registration Number and Ringer Equivalence Number (REN) for this
equipment. You must, upon request, provide this information to your
telephone company.
You may safely connect this equipment to the telephone line by means of a
standard modular jack, USOC RJ11C.
An FCC compliant telephone cord with a modular plug is provided with this
equipment. This equipment is designed to be connected to the telephone line
or premise’s wiring using a compatible modular jack that is Part 68
compliant. See the Installation section of this manual for details.
The REN is useful to determine the quantity of devices you may connect to
your telephone line and still have those devices ring when your telephone
number is called. In most, but not all areas, the sum of the RENs of all
devices connected to one line should not exceed five (5). To be certain of
the number of devices you may connect to your line, as determined by the
REN, you should contact your local telephone company to determine the
maximum REN for your calling area. If your fax damages the telephone
line, the telephone company may discontinue your service temporarily. If
possible, they will notify you in advance. But if advance notice is not
practical, you will be notified as soon as possible. You will be informed of
your right to file a complaint with the FCC.
47
Important
Information