Buffalo Technology WZR-G108 Network Router User Manual


 
7
Step 6 - Configure the AirStation
Step 5 - Access the AirStation Configuration Pages
Launch your Web browser and type 192.168.11.1 in the address field of the
Web browser window and click “Go.”
*If you have previously modified the AirStation and changed the LAN
IP address, enter the custom LAN IP address to access the AirStation
configuration pages.
If at any time you wish to restore settings to factory defaults, press the red
INIT/AOSS button on the rear of the AirStation for 6 seconds (AirStation must
be powered on). During this process the red DIAG light will flash rapidly. Once
the Red DIAG light has stopped flashing, and been turned off the AirStation has
completed restoring its settings.
The User name and password field
will open.
Enter “root” as the User name
Leave the password field blank.
Click OK.