Filter
Top Products
10
Congratulations! Your Ethernet Converter is set up. For information on
Advanced Settings, please see the User Manual located on the Ethernet
Converter Utility CD-ROM. You may also download the latest version of
the manual from www.buffalotech.com.
To begin using your Ethernet Converter immediately, disconnect the
Ethernet Converter from the network and power adapter, and move it to
the desired location.
Connect the Ethernet Converter's LAN ports to up to four wired Ethernet
devices such as computers, XBoxes, PS2s, or Home Theatre Media
Adapters. Plug the AC Adapter into a nearby power outlet and connect the
power connector to the Ethernet Converter. Power cycle any devices that
are connected to the Ethernet Converter.
If you set a static IP address on your computer on page 7, then reference
the operating system documentation to restore the IP settings on the
computer to obtain an IP Address automatically.
For additional settings and features, please see the Ethernet Converter
Manual located on the Ethernet Converter Utility CD-ROM.