Filter
Top Products
6
The IP Address Setup window will
open. Check the box next to Use
DHCP and press the OK button. The
Ethernet Converter will reboot; this
process may take as long as a minute.
The Ethernet Converter Manager will
then re-scan the network for Ethernet
Converters.
NOTE: If you want to give your
Ethernet Converter a static IP
address, than you can skip checking
Use DHCP and enter your own IP
address and Subnet mask in the
cooresponding elds. If using a static
IP address, it is recommended to pick
one inside your existing network's
subnet.
Search Results will appear again. If
more than one Ethernet Converter is
present, select the proper Ethernet
Converter from the list. Then press
the Congure button.
The Ethernet Converter Manager
will connect you to the Ethernet
Converter's web based conguration
tool. You will be prompted for a
username and password.
By default, the username is root and
there is no password.
After entering the user name, press
the OK button. Turn to page 8 to
continue conguration.