Buffalo Technology WBR2-G54 Network Router User Manual


 
52
IP Filter setting - Limits the
type of packets allowed to pass
between the WAN and LAN.
The maximum number of rules
is 32.
Operation - Packets from
WAN (or LAN), select ignored,
rejected, or accepted. Select
the operation to be performed
on the packets.
Packets from:
• WAN side - packets coming from the WAN side will be fi ltered.
• LAN side - packets from the LAN side will be fi ltered.
Are :
• Ignored - Stop the packet and do not route it.
• Rejected - Return the rejected packet to the point of origin.
• Accepted - Pass the packet through.
Destination IP Address - The IP address to be fi ltered.
Source IP Address - The IP address designated for fi ltering. If all IP addresses must be fi ltered,
leave this box blank.
Warning: If administrator selects packet from LAN is Ignored or Rejected, the ad min is tra tor will
IP Filter
setting
• WAN side - packets coming from the WAN side will be fi ltered.
IP Filter
setting
Advanced Settings