Cables to Go AVS815 Network Card User Manual


 
3. Transmissions
23
If you use the infra-red remote control of another piece of video
equipment, these infra-red signals will be passed on via the RX 579 infra-
red module to the relevant appliance, such as a satellite-receiver, the
audio and video signals of which are being transmitted. In order to allow
this equipment, e.g. the satellite receiver, to be controlled via the remote
control to select programmes, the infra-red transmitter on the infra-red
module must be glued onto the infra-red receiver of the equipment that
is being remote-controlled.
When it is being glued on, attention must be paid to ensuring that the
"infra-red eye” of the unit is not completely covered over, so as to ensure
that direct control with the original remote-control unit is still possible.
The extension module possesses two infra-red diodes for controlling two
different units, e.g. a satellite received and a video-recorder.
Establish the position of the infra-red receiver with the aid of the
operating instructions for the unit that is to be controlled; if it is not
possible to locate it exactly, a little trial-and-error will be necessary. You
will thus have the possibility of controlling the unit, the signals of which
are to be transmitted, with the standard remote-c.
AVS 850 Transmitter
2nd television set
AVS 840 Receiver
SAT-TV
1st television set
Cabel-TV