Filter
Top Products
Accessing Local Management
2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide 5-7
5.4 ACCESSING LOCAL MANAGEMENT
Access to Local Management is controlled through the Password screen
Figure 5-3. Whenever a connection is made to the 2E4X-27 the Password
screen displays. Before continuing, the user must enter a password
(community name) which is compared to the previously stored
passwords. The level of access allowed the user depends on the password.
To set or change passwords, refer to Section 5.8. The following steps
describe the procedure to access Local Management.
1. Turn on the terminal. Press ENTER (this may take up to four times,
because the COM port auto-senses the baud rate of the terminal) until
the 2E4X-27 Local Management Password screen displays. It is the
automatic line speed seeking feature of the port that makes it necessary
at times to press ENTER several times.
Figure 5-3 The 2E4X-27 Local Management Password Screen
2. Enter the Password and press ENTER. The default super-user access
password is “public” or press ENTER.
2E42-27 LOCAL MANAGEMENT
CABLETRON Systems, Incorporated
P.O.Box 5005
Rochester, NH 03866-5005 USA
(603) 332-9400
(c) Copyright CABLETRON Systems, Inc, 1997
Device Serial Number: XXXXXXXXX
Device Hardware Revision: XX
Device Firmware Revision: X.XX.XX
Device BOOTPROM Revision: X.XX.XX
Enter Password:
19601-12
Event Message Line