Cabletron Systems 2E42-27 Switch User Manual


 
High Speed Interface Configuration Menu Screen
2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide 5-47
To access the High Speed Interface Configuration Menu screen from the
Device Specific Configuration Menu screen, use the arrow keys to
highlight the HIGH SPEED INTERFACE CONFIGURATION menu
item and press ENTER. The High Speed Interface Configuration Menu
screen, Figure 5-21, displays.
Figure 5-21 High Speed Interface Configuration Menu Screen
The following briefly explains each screen accessible from the High
Speed Interface Configuration Menu screen.
FAST ETHERNET INTERFACES
Displays the types of interfaces installed in ports 25 and 26, their current
operating mode, and indicates if the ports are linked. This screen also
allows the user to enable or disable Auto-Negotiation and set the
Advertised Ability. For details, refer to Section 5.15.
HSIM
Displays the types of interfaces installed in the High Speed Interface
Module (HSIM) slot. The HSIM screens are depicted in their respective
user’s guides.
Firmware Revision: XX.XX.XX
High Speed Interface Configuration Menu
FAST ETHERNET INTERFACES
HSIM
19601-53
Device Type: 2E42-27
BOOTPROM Revision: XX.XX.XX
2E42-27 LOCAL MANAGEMENT
Event Message Line
RETURN
SAVE
EXIT