Cabletron Systems 2E42-27 Switch User Manual


 
Chapter 5: Local Management
5-34 2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide
5.9 SNMP TRAPS SCREEN
Since the 2E4X-27 is an SNMP compliant device, it can send messages to
multiple Network Management Stations to alert users of status changes.
The SNMP Traps screen is shown in Figure 5-16.
To access the SNMP Traps screen from the Device Configuration Menu
screen, use the arrow keys to highlight the SNMP TRAPS menu item and
press ENTER. The SNMP Traps screen displays.
Figure 5-16 SNMP Traps Screen
The following explains each field of the SNMP Traps screen.
Trap Destination (Modifiable)
Indicates the IP address of the workstation to receive trap alarms. Up to
eight different destinations can be defined.
Trap Community Name (Modifiable)
Displays the Community Name included in the trap message sent to the
Network Management Station with the associated IP address.
Firmware Revision: XX.XX.XX
SNMP Traps
19601-17
Device Type: 2E42-27
BOOTPROM Revision: XX.XX.XX
Trap Community Name
public
public
public
public
public
public
public
public
2E42-27 LOCAL MANAGEMENT
Event Message Line
RETURNSAVE
Trap Destination
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Enable Traps
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
EXIT