Filter
Top Products
Chapter 5: Local Management
5-84 2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide
show:
Syntax: show <PROTOCOL> <TABLE>
Description: The show command displays information
concerning various components of the device.
Protocols currently supported are IP, IPX,
DECnet, and AppleTalk. Components of those
protocols that are currently supported are ARP
caches, route tables, FIB tables, server tables,
and interface tables. The number of valid
entries in the table will be displayed at the end
of the table display.
Options: Not Applicable
Example:
traceroute:
Syntax: traceroute [IP address]
Description: The traceroute command generates a
TRACEROUTE request to a specified IP
address and provides a display of all next-hop
routers in the path to the device. If the device is
not reached, the command displays all next-hop
routers to the point of failure.
Options: Not Applicable
-> show Appletalk interfaces
-> show IP ARP
17421-46
# Interface
# 1
# 2
AdminStatus
enabled
disabled
Framing
ethernet
ethernet
MTU
1500
1500
OperStatus
enabled
disabled
Forwarding
enabled
disabled
# Interface
# 3
# 4
MediaType
3 (dynamic)
3 (dynamic)
PhysicalAddress
00:00:1d:04:40:5d
08:00:20:0e:d8:31
NetworkAddress
123.456.40.1
123.456.40.30
-> show Appletalk interfaces
-> show IP ARP
17421-46
# Interface
# 1
# 2
AdminStatus
enabled
disabled
Framing
ethernet
ethernet
MTU
1500
1500
OperStatus
enabled
disabled
Forwarding
enabled
disabled
# Interface
# 3
# 4
MediaType
3 (dynamic)
3 (dynamic)
PhysicalAddress
00:00:1d:04:40:5d
08:00:20:0e:d8:31
NetworkAddress
123.456.40.1
123.456.40.30