Cabletron Systems 2E43-27 Switch User Manual


 
Chapter 5: Local Management
5-18 2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide
Device Uptime (Read-Only)
Displays the total time that the device has been operating.
Operational Mode (Toggle)
Allows the user to set the 2E4X-27 so it operates as a traditional switch
(802.1D SWITCHING), an IEEE 802.1Q switch (802.1Q SWITCHING),
or as a Cabletron Systems SecureFast switch (SECURE FAST VLAN).
In 802.1D SWITCHING mode, the 24 ports on the front panel, and each
Fast Ethernet Interface Module, and HSIM port(s) are bridged together.
In 802.1Q SWITCHING mode, the device is able to increase its switching
functionality by creating and maintaining IEEE port based Virtual Local
Area Networks (VLANs).
When the operational mode is set to SECURE FAST VLAN, the device
acts as a SecureFast switch. With the Cabletron Systems VLAN Manager
software, the device is able to increase its switching functionality by
creating and maintaining VLANs.
For details on how to select the Operational Mode, refer to Section 5.7.9.
Com (Toggle)
This field allows the user to enable or disable the COM port. The
selection toggles between ENABLED and DISABLED. The default is
ENABLED. For details about setting up the COM port, refer to
Section 5.7.10.
Application (Toggle)
Displays the application set for the COM port. This field allows the user
to set the application that the COM port supports, which includes:
Local Management (LM) via a terminal or modem connection
Uninterruptible Power Supply (UPS)
The UPS setting allows the COM port to be used to monitor an American
Power Conversion Uninterruptible Power Supply (UPS).
The baud rate setting for LM is automatically sensed. For UPS, the baud
rate is automatically set to 2400.
For details about how to configure the COM port, refer to Section 5.7.10.