Cabletron Systems 2E43-27 Switch User Manual


 
Chapter 5: Local Management
5-42 2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide
To set the Operation Mode for all ports (1-24), proceed as follows:
1. Use the arrow keys to highlight the SET ALL PORTS field.
2. Press the SPACE bar until you see FULL or STANDARD.
3. Use the arrow keys to highlight the SAVE command on the bottom
line of the screen.
4. Press ENTER. The message “SAVED OK” displays.
5.12 DEVICE SPECIFIC CONFIGURATION MENU
SCREEN
The Device Specific Configuration Menu screen, Figure 5-19, allows the
user to select one of five screens to configure ports or check system
resources specific to the 2E4X-27.
To access the Device Specific Configuration Menu screen from the
Device Configuration Menu screen, use the arrow keys to highlight the
DEVICE SPECIFIC CONFIGURATION menu item and press
ENTER. The Device Specific Configuration Menu screen displays.
NOTE
The following menu items on the Device Specific Configuration
Menu screen may not display if the operational mode of the
device is set to 802.1Q SWITCHING or SECURE FAST VLAN:
PORT REDIRECT FUNCTION
BROADCAST SUPPRESSION
Refer to the Release Notes to see if the functionality provided
above screens is supported. Section 5.7.9 describes how to
the set the operational mode.