Filter
Top Products
High Speed Interface Configuration Menu Screen (6E12X-26 Only)
6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide 5-75
Figure 5-28 High Speed Interface Configuration Screen for the 6E12X-26
The following briefly explains each field of the High Speed Interface
Configuration screen.
Port Type (Read-Only)
Displays the name of the interface (FE-100FX, FE-100TX or FE-100F3)
installed in ports 25 and 26. Figure 5-28 shows that there is an FE-100TX
interface installed in port 25 and no interface, indicated by Unknown, in
Port 26.
Link Status (Read-Only)
Indicates whether or not there is a physical connection from this port to
another 10BASE-F or 100BASE-TX/FX device. One of the following
values is displayed:
• Link – There is a link signal present and a valid physical connection
to another 10BASE-F or 100BASE-TX/FX device.
• No Link – There is no link signal present and there is no valid physical
connection to another device.
Firmware Revision: XX.XX.XX
High Speed Interface Configuration
BOOTPROM Revision: XX.XX.XX
Port 25
FE-100TX
Link
100Base-TXFD
[Auto-Negotiation]
[100Base-TXFD] [Disabled]
RETURN
Module Type: 6E122-26
Slot Number:
X
6E122-26 LOCAL MANAGEMENT
Event Message Line
SAVE
Port Type
Link Status
Current Oper. Mode
Desired Oper. Mode
Advertised Ability
Port 26
Unknown
No Link
[N/A]
[N/A]
[N/A]
EXIT